Publicité
Les langues disponibles
Les langues disponibles
Maintenance and care
6.2
Trouble shooting
ERROR
The clamping-power is not big
enough, the load is slipping out
optional
(
)
optional
(
)
Adjustment of the gripping range
optional
(
)
Property of material
Unbalanced load
Adjustment of the gripping range
optional
(
)
6.3
Repairs
Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by an expert.
53100409
CAUSE
•
The grippers are worn
•
The maximum load is exceed
•
The actual opening width is not
correct
•
The surface of the material is dirty
or the material is not suitable /
allowed for this device.
•
The device is not loaded
symmetrically
•
The adjustment of the gripping
range is not symmetrical.
16 / 18
REPAIR
•
Replace the grippers
•
Reduce the weight of. the load
•
Adjust the gripping range according
to the load you want to transport
•
Check the surface of the material
or ask the manufacturer, if you the
material is allowed for this device.
•
Adjust the position of the load
•
Correct the adjustment of the
gripping range
GB
Publicité
