Publicité
Les langues disponibles
Les langues disponibles
English
2
3
► Remove cap (1) and strainer (2).
► Take the filter (4) out of the container (3).
► Rinse the filter under running water.
► Fit the filter on the connector (5) and push it
down until it stops.
To clean the filter in the spray gun:
1
► Remove the control handle (3) from the spray
gun (1).
► Remove the filter (2) from the spray gun.
21 Inspection and Maintenance
21.1
Inspection and Maintenance Chart
The following maintenance intervals are examples and apply for nor‐
mal operating conditions. Actual use and your experience will deter‐
mine the frequency of required inspection and maintenance.
Complete Machine
Connectors on the hose
Coupling on the spray lance and spray
gun
Filter and Strainer
Nozzle
22
1
4
5
3
2
► Rinse the filter under running water.
► Insert the filter into the spray gun and tighten
by hand.
► Fit the control handle on the spry gun and
tighten firmly by hand.
20.3
Cleaning the Nozzle
A clogged nozzle can cause excessive pressure
to build in the pump. Clean the nozzle if it
becomes clogged.
To clean the nozzle:
2
1
► Remove the nozzle (1) from the connecting
piece (2).
► Disassemble the nozzle.
► Hold the nozzle and connecting piece under
running water and dry them with a cloth.
► Attach the nozzle to the connecting piece and
tighten firmly by hand.
Visual inspection
Clean
Clean
Clean
Clean
Clean
21 Inspection and Maintenance
X
X
X
X
X
X
0458-600-8221-B
20
20.3
20.2
20.3
Publicité
