Wiko rainbow LITE 4G Guide D'utilisateur page 7

Basic Operations
~ SIM Management
When you turn on your phone for the first time,
various items of information about the SIM card(s) are
displayed. You are asked whether you want to modify
the settings for calls, messages and the internet data
connection. SIM1 is configured as the default SIM card
for data connection.
Now you can:
1. Set the default SIM for voice and video calls, SMS/
MMS and internet data connection.
2. You can still choose a different SIM when performing
an action, such as before making a call or sending a
SMS/MMS: by selecting «always ask».
~ Network Connection
The first time the phone is turned on, or when you
change SIM card(s) and re-start the phone, the
Access point settings menu will be brought up. Press
on Select.
Press on the name of the SIM card to display the list
of access points. Choose the one that matches your
operator's by pressing on the button on the right, then
press on RETURN to go back to the previous menu.
• APN Not Available
If your operator does not appear in the list or the list
is empty, ask your operator how to configure the APN
manually. To do this, press on the button and en-
ter the information provided by your operator. Return
to the previous menu, then choose the APN that you
have just saved.
• Enabling Data Connection
To check your data connection settings:
1. Go to Settings > Wireless & networks > ...More >
Mobile networks > Access Point Names, then enable
the access point according to your operator/package.
2. To activate Mobile data, drag the notification panel
downward with two fingers and enable data connection
by clicking on .
3.
You can choose with which SIM card you will enable
data connection in Settings > Wireless & network > SIM
cards > Preferred SIM for > Mobile data, then press on
the SIM card you want to activate.
Data Roaming
•
Note that for roaming SIM cards, you must enable the
data roaming in the Settings > Wireless & networks
> ...More > Mobile networks > Activate Data roaming.
Otherwise, the internet connection will be disabled by
default.
4G Service
•
If you have two SIM cards inserted, only one of them can
be enabled to receive the 4G service. You are advised to
enable SIM1 for the best performance. If you want to
change SIM, go to Settings > Wireless & networks >
...More > Mobile networks > SIM 1 or SIM 2 > Preferred
network type > 4G/3G/2G.