Assembly - Delta 22-590 Manuel D'utilisation

For your own safety, do not connect the machine to the power source until the machine is
completely assembled and you read and understand the entire instruction manual.
ASSEMBLY TOOLS REQUIRED
Cutterhead Wrench (Supplied)
HOW TO PREPARE FOR DUST MANAgEMENT
You have two options for dust management. The first is the dust deflector and the second is the dust collection attach-
ment to attach your machine to a dust collector.
HOW TO INSTALL THE DUST COLLECTION ATTACHMENT
Disconnect the machine from the power source.
1. Remove the two screws (A) Fig. 1 that secure the dust deflector.
2. Remove the dust deflector (B) Fig. 2.
3. Place the dust collection attachment (C) Fig. 3A in the slots provided.
4. Attach the dust collection attachment with the four M6 star socket head screws (D) Fig. 4A. Two of these screws
were removed in STEP 1.
5. Reverse the procedure for installing the dust deflector. Install the dust deflector with the label up and curved lip
pointing down (Fig. 1).
When using the dust collection attachment, do not operate the unit without a hose connected and a dust
collector in operation.
Fig. 1

ASSEMBLY

A
C
Fig. 3A
7
ASSEMBLY TIME ESTIMATE
Approximately 1/2 hour
B
D
Fig. 2
Fig. 4A