Cleaning the Multi-Surface Brushes
1
Pinch the brush-frame release tab,
lift the tab and remove any obstructions.
2
Remove the brushes from the
robot. Remove the brush caps
from the ends of the brushes.
Remove any hair or debris that
has collected beneath the caps.
Reinstall the brush caps.
3
Remove any hair or debris from
the square and hexagonal pegs
on the opposite side of the brushes.
4
Reinstall the brushes in the robot.
Match the shape of the brush pegs
with the shape of the brush icons in
the cleaning head module.
Cleaning the Sensors, Camera Window and
Charging Contacts
1
Wipe sensors, camera window, and charging
contacts with a clean, dry cloth.
Note:
Inspect the camera window. If you notice any
cracks, please contact customer care.
Roomba
EN
9
j7+ Owner's Guide
®