Publicité
Les langues disponibles
Les langues disponibles
With the appliance running
press the "TIMER" key to enter the function, then press key "-" or "+" once or more times to set
the switch off delay time (from 1 to 24 hours), the led TIMER blinks in green.
When the value set on the display stops flashing, the value is saved and the led switches steady on.
When the set time finishes, the appliance switches off.
To deactivate the function, set the operation time to "00" or switch off the appliance.
Timer led
This led turns on in green when the function is active.
While the led flashes, it is possible to set the operation time (from 1 to 24 hours). Once the
desired time has been selected, wait for the led to stop flashing; the function is active.
+ key
Press this key when the appliance is running to increase the desired percentage of humidity
in the room.
Default value is 60% - Value settable from 20% to 80% (steps of 5 at a time).
It is not possible to change the percentage of humidity in "LAUNDRY" mode.
Keep key "+" pressed for about 5 seconds, the display shows the room temperature (°C).
- key
Press this key when the appliance is running to decrease the desired percentage of humidity
in the room.
It is not possible to change the percentage of humidity in "LAUNDRY" mode.
Keep key "-" pressed for about 5 seconds, the display shows the room temperature (°C).
Fan key
Press this key when the appliance is running to select the desired fan speed.
- Maximum speed
- Minimum speed
It is not possible to change the fan speed in "LAUNDRY" mode.
Mode key
Press this key when the appliance is running to select the desired function.
- "Laundry" mode
- "Normal" mode
Air filter to clean warning led
When the appliance reaches 600 hours of operation, this led flashes in green indicating that it
is necessary to proceed with the filter cleaning (see the "Cleaning" paragraph).
Switch the appliance off, disconnect the plug from the power socket and proceed with the filter
cleaning.
Wait for the filter to have completely dried before repositioning it.
Do not use the appliance without filter or if the latter is damaged.
Display
The display has three functions.
• When the appliance is running, it shows the percentage of humidity in the room.
• During the percentage of humidity setting ("+" and "-" keys), it shows the percentage of hu-
midity you desire to set (if no key is pressed within 5 seconds, the display returns to show
the percentage of humidity in the room).
• During the Timer setting, it shows the operation time you desire to set (if no key is pressed
within 5 seconds, the display returns to show the percentage of humidity in the room).
- Led
turned on in green
- Led
turned on in green
- Led
on in green
- Led
on in green
EN - 18
AQUARIA SLIM
Publicité
