Publicité
Les langues disponibles
Les langues disponibles
If heater does not start, turn power switch to "0" and then to "1" position. if the heater still does not start
after three times please contact your dealer.
Attention： while the heater is operating, never let the floor ground overheats to prevent causing fire.
◆ Flameout
Pay attention
1、when you shut off the heater, make sure the flame is out before you left the appliance.
2、Put the power switch to position"0" waitting fan stop working and the indicator extinguishes, then
remove the plug from the socket.
◆ safety device
Flame-out protection：Utilizes a photocell to monitor the flame in burn chamber during normal
operation.The photosensitive resistor will become infinite big , cut off Electrovalve Assy ,will stop offer
oil automatic , the fan will working 90s then cut off the power .
Electrical power breakdown protection
when the power breaks down the heater stops working without the plug being removed from the
socket . When the power is recovered, the indicator will light but the heater will not work. Please press
the power switch to start up the heater.
Description of working principles
A．Combustion chamber B. Spark plug C. Fan blade D. Motor E. Pump
F. Air intake filter G. Air output filter H. Fuel tank I. Controller J. Air inlet pipe
K. Flame steady plate L. Oil nozzle M. Oil sucking pipe
46
Publicité
