Würth 5701 403 00 Serie Traduction Des Instructions De Service D'origine page 25

follow the instructions on risk reduction in this
manual.
Electric shock after contact with hidden wires –
Hold the product only by insulated surfaces.
Respiratory injury from dust created by operating
the product – Wear suitable protection depending
on type of dust.
Cordless rotary
hammer
Article number
Voltage
Chuck
Suitable for SDS plus
No load speed
Maximum drilling capacity
in concrete
Maximum drilling capacity
in wood
Maximum drilling capacity
in metal
Impact energy
Rated of percussion
Chuck neck diameter
Weight (According to EPTA
procedure 01/2014)
Weight - not incl. battery
pack
Ambient operating
temperature for the tool and
battery pack
Ambient storage
temperature for the tool and
battery pack
Recommended ambient
charging temperature
Recommended battery type
Recommended charger
See page 3.
1. SDS chuck
2. Mode selector
ABH 18
3. Direction of rotation selector
COMPACT
4. Trigger switch
5701 403 00X
5. Handle, insulated gripping surface
18 V/DC
6. Battery pack
1.5 - 13 mm
7. Auxiliary handle, insulated gripping surface
8. Depth guide rod clamp
0-1400 min
-1
9. Depth gauge
26 mm
10. Drill chuck
30 mm
The drill can be used for drilling into various materials,
13 mm
including wood, metal, and plastics using a drill bit
having a shank diameter of less than 13 mm. The
2.5 J
product can be used to drive and remove screws and
0-4800 min
bolts using an appropriate bit.
-1
43 mm
For damage caused by usage other than intended, the
user is responsible.
3.75 kg (4.0 ah) -
3.76 kg (5.0 ah)
3.07 kg
0 - 40°C
0 - 27°C
5 - 40°C
Know Your Product
Intended Use
Symbols
Read all safety warnings and all
instructions.
Warning
V Volts
Direct current
No-load speed
LI 18V/4 Ah BASIC
LI 18V/5 Ah BASIC
ALG 18/4 BASIC
ALG 18/6 FAST
25