Main View; Keys - Pfannenberg SMP55 Instructions D'utilisation

English

1. Main view

In main view, the target display shows the value measured by the thermoregulation probe.
Following table explains the meaning associated to LEDs.
Icon

2. Keys

DOWN
Prg (press together F2+F4)
Description
Alarm At least one alarm is active
Heating Hot-Gas or Heater is active
Cooling Compressor is active
°C With temperature value displayed
bar With pressure value displayed
Led #1 Pump is active
Led #2 Compressor is active
Led #3 Fan is active
Led #4 Hot-Gas or Heater is active
Led #5 OK Level
Led #6 n/a
Led #7 n/a
key
Increase a value
UP
Go to next label
Decrease a value
Go to previous label
Exit without saving new settings
esc
Go back to previous level
Confirm value / exit and save new settings
Move to next level (open folder, subfolder, parameter,
set
value)
Open state/set Menu
Access programming Menu
70040-096_01-B.docx
ON
Description
press and release
3