Publicité
Les langues disponibles
Les langues disponibles
Non-Security Adapter Bracket Fasteners
M5 x 12mm (4)
M5 x 25mm (4)
(520-1027)
(520-9543)
I.D. .34" (4)
(540-1059)
Optional Horizontal Adjustment of Wall Arm on Wall Plate
NOTE: If mounting wall arm (A) to wood stud walls, slots on wall plate must align to wood studs.
1
Determine desired location of display center detailed in step 2.
Measure the distance from the center of wall arm (A) to desired display center. Loosen four phillips screws and
slide wall arm up to 4.5" left or right to align to desired display center. Retighten screws.
Do not adjust arm while display is attached.
Skip to page 6 for Concrete and Cinder Block Installation.
SLOT
WALL ARM
SLOT
M6 x 12mm (4)
(520-1128)
multi-washer (4)
(580-1398)
PHILLIPS SCREWS
4 of 41
M6 x 25mm (4)
M8 x 12mm (4)
(520-1208)
WALL PLATE
FRONT PLATE NOT
SHOWN FOR CLARITY
ISSUED: 01-25-12 SHEET #: 095-9370-6 09-20-13
M8 x 25mm (4)
(520-1031)
(520-9571)
Publicité
