Makita XBU02 Manuel D'instructions page 40

OPERATION
Lubrication
Saw chain is automatically lubricated when the tool is
in operation. Check the amount of remaining oil in the
oil tank periodically through the oil inspection window.
tank, make sure that the oil tank cap is tightened securely.
2
1. Oil tank cap 2. Oil inspection window
it and wait until lubrication on saw chain is adequate.
NOTICE:
been completely emptied, add oil up to the
ery may otherwise be impaired.
NOTICE: Use the saw chain oil exclusively
available in the market.
NOTICE: Never use oil including dust and
particles or volatile oil.
NOTICE: When pruning trees, use botanical
oil. Mineral oil may harm trees.
NOTICE: Before the cutting operation,
make sure that the provided oil tank cap is
screwed in place.
WORKING WITH THE CHAIN SAW
a minimum practice, do cutting logs on a
saw-horse or cradle.
use a safe support (saw horse or cradle).
Do not steady the workpiece with your foot,
and do not allow anyone else to hold or
steady it.
rotation.
1
away from the saw chain when the motor is
operating.
both hands when the motor is running.
proper footing and balance at all times.
NOTICE: Never toss or drop the tool.
NOTICE: Do not cover the vents of the tool.
Pruning trees
Bring the chain saw body into contact with the
branch to be cut before switching on. Otherwise
it may cause the guide bar to wobble, resulting
in injury to operator. Saw the wood to be cut by
just moving it down by using the weight of the
chain saw.
-
16
ENGLISH
CAUTION:
CAUTION: When sawing precut timber,
CAUTION: Secure round pieces against
CAUTION: Keep all parts of the body
CAUTION:
CAUTION: Do not overreach. Keep