Introduction To The Kt-300 Door Controller - Kantech KT-300 Manuel D'installation

KT-300 - ENGLISH INSTALLATION MANUAL

Introduction to the KT-300 Door Controller

Notice: The KT-300 door controller will only operate with WinPass Version 2 and EntraPass Version 3.
Innovative and Powerful
Kantech's new KT-300 door controller is designed to meet the highest standards of access control and point
monitoring applications. The KT-300 controls 2 doors and is easily linked to a network controlling up to 512
doors.
Downloadable Firmware
The firmware program, which is stored in the controller's flash memory, is updated without changing the
memory chips. The firmware program can be uploaded from any workstation.
Speed Selection - Fast ! Up to 115,200 Baud
The KT-300 automatically detects the loop communication speed as set at the system's workstations.
Trouble and Reporting
The KT-300 constantly supervises battery conditions and reports "Low battery" or "No battery" status to the
system. All power outputs are supervised and individually protected against short-circuits and surges by a self-
resetting PTC. Locking devices are also supervised for short and open circuits.
Built-in Combus Expansion
The KT-300 supports expansion modulesto add inputs, outputs and an LCD time and date display for Time
& Attendance functions.
KT-PC4204 - 4-Relay and Combus
KT-PC4108 - 8-Zone Input Expansion Module
Additional Power Supply Module
KT-LCD4501 - LCD Time & Date Display
KT-PC4216 - 16-Output Expansion Module
for Time and Attendance Functions
Page: 4
DN1315-0006 © 2000 Kantech Systems Inc.