Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS:
STEP 1
In the Top Panel (1), insert the 4 Large Cam Screws
(B) in the locations specified. Insert the 7 Wooden
Dowels (C) in the locations specified and lightly tap
in with Rubber Mallet.
STEP 2
In the Back Panel (3), insert the 4 Large Cam Locks
in the holes specified. When inserting the cam lock,
make sure that the arrow is facing the cam screw
entry.
STEP 3
In the Left Side Panel (4) and Right Side Panel (5),
insert the 2 Large Cam Locks in the holes specified.
When inserting the cam lock, make sure that the arrow
is facing the cam screw entry. Next insert the 2 Large
Cam Screws in the holes specified. Finally, insert the
3 Wooden Dowels in the holes specified and lightly
tap in with Rubber Mallet.
LLR02236_Manual.indd 3
LLR02236_Manual.indd 3
Table Panel
B
C
Back Panel
A
C
B
Side Panel
A
C
B
1
C
A
3
4 & 5
C
PAGE 3 OF 15
3/4/11 12:20 PM
3/4/11 12:20 PM
Publicité
