Lorell LLR02236 Mode D'emploi page 2

INSTRUCTIONS:
If you are missing parts or have other concerns, please email Lorell@sprich.com or fax: 404-472-9063.
Please provide the following information:
1. Full Name
2. Physical Address – do not include P.O. Box as our carriers cannot deliver to a P.O. Boxes
3. Phone Number
4. Model Number
5. Part Number
6. Invoice #
7. Date of Purchase
Note: Our policy is to send all parts requests normal ground transportation, if your requirements are to have these parts via overnight/next day,
please provide your designated carrier and account number. Replacement panels are not available. If damaged has occurred during shipment,
please return the entire unit to place of purchase for credit and replacement. Original Invoice may be required.
BEFORE YOU BEGIN:
Open, identify and count all parts prior to assembly. Lay out the parts on a non-abrasive surface such as carpet or
blanket. You will need the tools identified below:
1. Phillips Head Screw Driver
2. Flat Head Screw Driver
3. Rubber Mallet (recommended)
HARDWARE IDENTIFICATION
A. Large Cam Lock
8pcs
F. Shelf Hinge
2pcs
LLR02236_Manual.indd 1 LLR02236_Manual.indd 1
B. Large Cam Screw C. Wooden Dowel
8pcs
G. Drop Leaf Support
1pc
D. Wood Screw
13pcs 16pcs
H. Caster
2pcs
E. Cam Lock Cap
4pcs
I. Locking Caster
2pcs
PAGE 1 OF 15
3/4/11 12:20 PM 3/4/11 12:20 PM