Hama MyVoice1000 Mode D'emploi page 6

Warning
Do not use the headset while it is charging.
• If the battery is fully charged, the status LED (3) will go out.
• Disconnect all cable and mains connections after use.
Note
If you have not used the item for a few month, it may take 15-30
minutes for the status LED (3) to red when charging.
5. Operation
Switching the headset on/off
• Turn On:
With the device off, press and hold the
for 5 seconds until you hear a short tone. The status LED (3)
flashes in blue three times
• Turn Off:
With the device on, press and hold the
for 2 seconds until you hear a long tone. The status LED (3) will
light up in red briefly before the device turns off.
The first time the device is turned on, pairing is automatically started
– see 5.1 Bluetooth pairing.
multi-function key
multi-function key
(1)
(1)
5