GE DFE Série Manuel D'utilisation Et Instructions D'installation page 15

Single Serve Keurig K-Cup Brewer*
How to use the single serve dispenser
Load the K-Cup Brewer
1
Push to
open
Two Ways To Brew
2
1. Press the Start Heating button.
OR
connect for more information.**
Change Brew Size
3
Press the Brew Size button any time during the heating cycle to
NOTE: Press and hold the Brew Size button for 3 seconds to
toggle between Coffee and Cocoa. The default is Coffee.
NOTE: To abort the heating cycle, press and hold the Start Heating button for 3
seconds. To abort the brew dispense cycle, press and hold the Start Heating button
for 3 seconds, press the paddle, press any button on the display besides Brew Size or
Brew Dispense, or open the right fresh food door.
4
Dispense
To dispense, slide the brewer into the rails. Make sure the brewer is pushed all the way into the bracket.
Place your mug on the drip tray mug icon, under the red brew spout. Press and hold Brew Dispense for 3
seconds until you hear the dispenser engage.
Cleaning the brewer
Periodic cleaning of dispenser recess area is recommended as staining may occur with usage
*Select Models Only
49-60792-1
Close the
brewer.
Lid will
click when
secure.
GEAppliances.com/
(Cont.)
CAUTION Cut/Puncture Hazard.
• There are two sharp needles located inside the
when cleaning.
•
children, as they may be injured in using the
Red brew
spout for mug
Mug icon for
alignment
placement
Rails for
the brewer
15