GE DFE Série Manuel D'utilisation Et Instructions D'installation page 47

Troubleshooting Tips... Before you call for service
Problem
Beverage quality not as expected
Liquid drips from the brewer after
brewer cycle is completed and the
brewer is removed from the bracket
dispenser
After brewing, my powdered
beverage is not fully cleared from
the used pod
Brewer lid is difficult to close
Brewer leaks during the brew cycle
*Select Models Only
49-60792-1
Possible Causes
You may be using non-standard or
retained by the brewer and drip
when it is removed
To ensure a quality beverage is
delivered, a short delay is required
to ensure the refrigerator is
operating correctly
powder may not dissolve fully.
Some powdered beverages develop
into 'clumps' when left sitting for
some time
Trouble in closing brewer lid or
What to Do
have not been damaged
drips when brewer is removed
Ensuring consistent, quality operation
requires the refrigerator to delay
dispense for a short period of time
Shake the powdered pods before
brewing to break up these clumps and
beverage with no filter, use the Cocoa
cycle selection
brewer prior to closing the lid. Lower
closing the brewer lid
brewer prior to closing the lid. Lower
closing the brewer lid. Recommend
not been damaged and have a good
seal between the top cover and plastic
bottom
47