HQ Power HQHZ10002 Mode D'emploi page 6

3. General Guidelines
Refer to the Velleman
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 6" (± 15 cm) in
front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
•
Familiarise yourself with the functions of the device before actually using it. Do not allow operation by
unqualified people. Any damage that may occur will most probably be due to unprofessional use of the device.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
•
Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
•
Mechanical wear and LEDs are not covered by warranty.
•
A qualified technician should install and service this device.
•
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
•
This device is designed for professional use on stage, in discos, theatres, etc.
•
Use the appropriate power supply (see Technical Specifications below).
•
There may be some smoke or a particular smell when the device is activated for the first time. This is
normal and any smoke or smell will gradually disappear.
•
Use the original packaging if the device is to be transported.
•
Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 power input + fuse
2 on-off switch
3 remote control input
4 manual fog button
5 fan speed regulator
5. Installation
•
Only install and use the device on a flat and stable surface. The device may not be tilted.
•
Install the device in a location where you can easily access the power cord.
•
Install the device in a well-ventilated area.
•
The carrying construction must be able to support 10 times the weight of the device for 1 hour
without deforming.
•
Never stand directly below the device when it is being mounted, removed or serviced. Have a
qualified technician check the device once a year and once before you bring it into service.
•
Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
•
Make sure there is no flammable material within a 0.5 m radius of the device.
V. 02 – 19/01/2022
HQHZ10001/HQHZ10002
®
Service and Quality Warranty on the last pages of this manual.
6 tiltable output nozzle
7 carrying handle
8 fluid tank
9 on-board control panel
10 DMX input and output
6 ©Velleman Group nv