BERG BIKY Mode D'emploi page 13

3. Maintenance
Some maintenance is necessary in order to use the
BERG product and have fun with it for a long time.
This chapter describes how, how often, and which
maintenance must be carried out.
3.1 Maintenance scheme
See page 10 for explanatory images.
Daily
Wheels / Tires
• Check for wear
• Check the tire pressure and if necessary increase the
pressure.
Monthly
Frame
• Clean and check all nuts and bolts.
• Check the frame for any cracks and fractures
Steering
• Check all nuts and bolts.
• Lubricate the moving parts.
Half Yearly
Plastic parts
• Clean the plastic parts and check for damage.
3.2 Maintenance activities
3.2.1 Frame
The frame is powder-coated. To prevent it from
corrosion, it is important to store the balance bike
indoors, and clean it regularly. If you want to conserve
the frame with grease, only use acid free substances.
You can treat damaged areas with paint.
• Check the bolts and nuts for rust and replace them to
prevent them from breaking which can cause injuries.
3.2.2 Wheels / Tires
• Regularly check the rims and tires for any damage
(for example cuts, cracks and bulges). Attention:
damaged rims and tires can lead to accidents! The
tires must not come into contact with oil, grease or
fuel.
• Check the tire pressure if your BERG balance bike has
pneumatic tires. The correct tire pressure is shown on
the outside of the tire. If the tires are at the correct
pressure the product will be light and easy to handle.
If the pressure is too low, the tires will leak quicker
and will suffer excessive wear and tear. If the tire
pressure is too high, the tire can for example come
loose from the rim, resulting in dangerous situations.
Attention: remember that in bright sunlight and at
high temperatures the tire pressure increases!
3.2.3 Steering
The steering equipment must be checked every month
for the following:
• Damage, rust, wear and tear.
• All the nuts and bolts must be tightened.
3.2.4 Plastic parts
• The plastic parts must be checked regularly for
damage and breakage.
• In the case of breakage, do not use the product but
immediately replace the part concerned with an
original part, in order to guarantee the safety of the
user
4. Warranty
4.1 Warranty period
BERG products are of excellent quality. To provide you
with years of carefree fun with our products, BERG
offers you a functionality warranty. A functionality
warranty is a warranty regarding its functional use.
Please consult the table below for the terms of this
warranty.
Frame*
Parts
Wheels, etc.
*The functionality warranty on the frame can be
increased with 1 year if the product is being registered
within 1 month after purchase.
Parts that are liable to wear and tear (such as wheels
and brake) are excluded from warranty.
Check www.bergtoys.com for extensive warranty
regulations.
3 years
3 years
0 years
12