Télécharger Imprimer la page

EZiclean aqua connect x850 Manuel De L'utilisateur page 9

Publicité

Les langues disponibles

Les langues disponibles

Thank you for the trust you place in our EZIclean® range. We hope you are satisfied with this product and now let you
take note of the following instructions for use.
- Only authorized technicians can
disassemble this product. Users are
not recommended to disassemble this
product themselves.
- Use only the original power adapter
supplied. Other adapters may damage
this product.
- Do not touch the wires, plugs or power
adapters with wet hands.
- Keep the cur tains away from the
robot so that it does not suck them up.
- Clean the product without charge.
- Do not bend the wires and do not
place heavy and / or sharp objects
on the machine.
- This product is an indoor household
product. Do not use it outdoors.
- Do not sit on the product.
- Do not use this product in a humid
environment (eg bathroom).
- Before using the product, remove
all fragile items (eg glasses, lamps,
etc.) which may become tangled in
the side brushes, the wheels and the
main brush.
- Do not place this product in a place
where it is easy to fall (eg desk or chairs).
- Turn off the switch on the side of the
machine during transport or if you do
not intend to use it for a long time.
Please read the following information carefully before using your robot vacuum cleaner or its accessories. Do not
disassemble the device and do not try to repair it yourself. In the event of a malfunction, please contact your dealer for
professional advice. Stairs: The device uses sensors to avoid falling on steps, on stairs or over an edge. In some situations,
the sensors may malfunction. This device cannot detect steps that are less than 8 cm high. Steps less than 8 cm high
can cause the robot to fall. Highly reflective or very dark surfaces on certain steps or stairs, such as glass or polished
ceramic can cause the device to fall. If available, use the virtual wall or place a carpet on the bottom step to prevent your
robot from falling. Avoid using your robotic vacuum cleaner on mezzanines, landings or elevated, undefined surfaces.
The symbol on this appliance indicates that it cannot be disposed of with household waste. You must deposit it in an electrical and
electronic waste recycling center. Disposal must be carried out in accordance with local waste regulations. For further information
on the treatment, recovery and recycling of this appliance, please contact your municipality, the local household waste disposal
service or the retailer of the appliance.
Welcome to EZI® - Make it easy
Precautions for use
- Check that the AC adapter is properly
plugged into the outlet before use.
- To avoid tripping, infor m other
members of the household when this
product is working.
- If it is full, empty the dust container
before using the product.
- Keep the product between 0 and 40 ° C.
- Do not use the product in an environment
above 40 ° C.
- Remove the battery from the robot
before putting it to recycle.
- Make sure that the product is not
energized when removing the battery.
- Recycle the battery.
- Use only the original rechargeable
battery and the charging base supplied
by the manufacturer.
- Non-rechargeable batteries are
strictly prohibited.
- Do not use the product in environments
close to flames or fragile objects.
- Keep hair, clothing, fingers and
other par ts of the body away from
the robot's openings, otherwise they
will be absorbed.
- Do not use the product on damp or
stagnant ground.
- Make sure that the robot does not
absorb stones and / or old paper that
EN
can obstruct it.
- Do not expose the robot to flammable
substances such as petrol, toner and
toner for printers or photocopiers.
- Do not expose the robot to burning
articles, such as cigarettes, matches,
ashes and other articles which may
cause a fire.
- Do not place items near the suction
nozzles.
- Do not use the product when the
suction nozzle is blocked.
- Clean dust, cotton, hair, etc. which
are in the suction nozzle to ensure
good air circulation.
- Use the power cable carefully to
avoid damage.
- Do not use the power cord to slide or
pull the robot and the charging station.
- Do not trap the power cable in
the doors.
- Do not pull on the power cable.
- Keep the power cable away from
heat sources.
- Do not use the charging station if
it is damaged.
- Even if the product has been severely
damaged, combustion of this product is
prohibited, this may cause the product
battery to explode.

Publicité

loading