Publicité
Les langues disponibles
Les langues disponibles
Sprache der
Sprache
Sprache der
editierbaren Texte
System
editierbaren Texte
Sprache der
editierbaren Texte
Tastenton
Bildschirm
Tastenton
z
Wecker
Einstellungen System
Wecker
Wecker
Tastenton
EIN
EIN
With
/
select e.g.
„
Weckzeit
Weckzeit
With
change to selection of the
„
–
+
+
With
/
set the
of an image stored on the SD card.
„
07 : 45
07 : 45
Intrinsic icons for control surfaces are to be deposited on the memory card
under image number 0250 ... 9999 and can be allocated in the ETS.
The configuration of images for permanent displays such as for a greeting
screen is done in the ETS. With a still image display, the touch-sensitive
display is locked for the length of the display.
The micro SD card must remain in the device while being used as My Pictures/
Graphics.
36
.
.
Cleaning display
The device has a special cleaning function to prevent any unintended func-
tions from being activated when removing dirt or fingerprints etc. While the
cleaning function is active, nothing is evaluated while the display surface is
touched.
Press control surface
„
Mo. 30.06.14
07:22
The display changes to the menu
Select submenu
„
The cleaning icon displays the locking of the touch-sensitive display.
Touches are not evaluated – in the delivered state 5 minutes – for the
configured period. The remaining cleaning time is displayed on the screen
as a countdown (Figure 8).
Clean the display surface with a lint-free cloth. Moisten the cleaning cloth
„
slightly with clear water if necessary.
Seite 5
Seite 6
Seite 7
After the countdown has finished, the display returns to the screensaver/
start page. The device can be operated again.
Do not use any sharp-edged implements for cleaning.
Do not use any aggressive detergents, acids or organic solvents.
Do not allow any moisture to get into the device.
Settings
System
Cleaning mode
in the top display row (8).
.
(Figure 8).
00:00:42
Figure 8: Cleaning mode
z
37
Publicité
