hager WDT030 Mode D'emploi page 17

z
Setting timer (Figure 6)
In the menu, up to 16 recurring time periods with an adjustable start
time and end time can be changed. An automatic function is assigned to each
time period, e.g. overnight shutdowns. Mo-Fr from 22:00 to 06:00 (Figure 6).
This time period can be assigned to one, two, ... all weekdays.
Time periods and the automatic functions to be executed during this time must
be programmed in the ETS beforehand. The page in the
empty when delivered.
At least one time period with a function is programmed.
With enter menu
„
The display changes to the timer menu. The programmed time periods are
displayed (Figure 6).
Search and select the time period you wish to change using
„
Press the display surface for hours, then the display surface for the minutes
„
Wecker
Einstellungen System Wecker
of the start time in succession.
Wecker
EIN EIN
System
The display area of the activated value is framed by a light border at the
Weckzeit
Weckzeit
bottom and to the right.
Sprache der
– + +
With editierbaren Texte / change the respective setpoint.
„
07 : 45 07 : 45
Seite 7
In the same way, change the end time
„
Activate the button for each weekday on which this function should be exe-
„
Tastenton
cuted within the defined time period.
The active buttons of the weekdays are displayed in light grey.
With confirm the entry.
„
The display returns to the previous menu level.
If the entries are not confirmed, with
menu level without saving. Using
previously as
32
Einstellungen System
Sprache Sprache der
System editierbaren Texte
, and select .
Bildschirm Tastenton
.
Einstellungen System
Einstellungen System
Sprache Sprache der
System editierbaren Texte
Sprache Sprache der
System editierbaren Texte
Bildschirm Tastenton
Bildschirm Tastenton
the display returns to the previous
the display returns to a page preset
without saving.
menu is
Einstellungen System
Sprache Sprache der
System editierbaren Texte
Bildschirm Tastenton
/ .
Settings Settings System
System Alarm
Cleaning mode Alarm clock
Settings System Timer Settings System Timer
–
Ventilation 2 Ventilation 3
from
P 02 12:00 to 12:05 P 03 18:00 bis 18:05
Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun
–
to
Night low. Mon-Fri Night low. Sat-Sun
P 04 22:00 bis 06:00 P 05 23:30 bis 09:00 Mon Tue
Mon Tue Wed Thu Fri Sat Sun Mon Tue Wed Thu Fri Sat Sun
Figure 6: Changing a time period
z
Timer
Service
P 02
+
12 : 00
+
12 : 05
Wed Thu Fri Sat Sun
33