Lamborghini Caloreclima FOCUS PRO 3 Notice D'installation Et D'entretien page 36

CHOKE ELECTRODES
After removing the cover, detach
the high-tension cables from the
transformer side, remove the
photo resistance 1, unscrew the
connector 2 that hooks the fuel
line to the choke 3, loosen the
screws 4 and remove the flange-
choke-deflectorelectrode assem-
bly.
Remove a screw 5, in order to remove the deflector, and the screws 6 to remove the elec-
trodes. The choke may be cleaned adequately by removing the filter and cleaning inside the
spray nozzle and jet with gasoline and a light oil rinse. Re-assemble all parts carefully with
special attention to the positioning of the electrodesdeflector.
FAN
WARNING:In the event of replacement or assembly/disassembly of the fan, make sure that
the latter does not touch the body burner platform as illustrated in the inclosed diagram.
UK
36
6
0,5 ÷1
1
5
3
4
2 4