Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE SWASH
Special Mode Operations
Activating/Deactivating Nightlight
The Nightlight is activated at the factory by default.
1. To deactivate the Nightlight, touch and hold "+" for four seconds.
This function cannot be performed while sitting on the seat.
2. To activate the Nightlight, touch and hold "+" for four seconds.
This function cannot be performed while sitting on the seat.
Sleep Mode
In Sleep Mode, the Swash essentially powers down. The Nightlight, the seat
heater and the water heater will turn off.
1. To activate Sleep Mode, touch and hold Stop button on the Auxiliary
Control for four seconds. The unit will power down.
2. To awaken the Swash from Sleep Mode, touch the Stop, Front,
or Strong button on the Auxiliary Control.
Factory Default Reset
It is possible to reset the Swash to Factory Default settings.
To reset the Factory Default settings, touch and hold the Stop button on
the Auxiliary Control for ten seconds. A beep will sound at two seconds
indicating the beginning of the reset process and another beep will sound at
four seconds indicating the reset is activated.
Automatic Tank Draining
1. To prevent stagnation, water in the warm water storage tank can be set to
drain and refill itself if the seat hasn't been used in 48 hours.
2. To program this feature, touch Stop and Water Temp at the same time and
hold for four seconds.
20
All manuals and user guides at all-guides.com
Publicité
