Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
OPERATING THE SWASH
Special Mode Operations
Activating/Deactivating Silent Mode
1. To activate Silent Mode, touch and hold " – " Water Pressure/Dry Temp
for four seconds. A beep will sound to indicate that Silent Mode has
been activated.
2. To deactivate Silent Mode, touch and hold " – " Water Pressure/Dry
Temp for four seconds. Two beeps will sound to indicate that Silent
Mode has been deactivated.
User Memory Setting
The Swash User 1 and User 2 memory function allows you to program
your preferred wash settings for a Front or Rear wash cycle for two users.
These settings include: Nozzle Position, Water Pressure, Water
Temperature, Seat Temperature, and Dryer Temperature (LE99 model
only). Follow the steps below to program and use the Memory Function.
Programming User 1 and User 2 Memory Function
User 1:
1. Sit on the seat. Select your preferred wash cycle (Rear, Front, Strong)
and adjust the nozzle position, water pressure, water temperature, seat
temperature and dry settings (LE99 model only) to your preference.
2. Touch Stop and Arrow Up for 3 seconds to lock in settings. All preset
LED lights will flash momentarily to confirm programming is complete.
User 2:
1. Sit on the seat. Select your preferred wash cycle (Rear, Front, Strong)
and adjust the nozzle position, water pressure, water temperature, seat
temperature and dry settings (LE99 model only) to your preference.
2. Touch Stop and Arrow Down for 3 seconds to lock in settings. All preset
LED lights will flash momentarily to confirm programming is complete.
Using User 1 and User 2 Memory Function
1. Sit on the seat. Touch the preferred User preset. The preset nozzle
position, water pressure, water temperature, seat temperature and dry
temperature will be activated.
2. Select the wash mode you desire.
19
Publicité
