Speaka Professional 2793803 Manuel D'instructions page 4

8 Troubleshooting
Problem Solution
Check the connections.
General product mal- Ensure there are no signal interferences and you are within
function transmission range.
Restart all devices.
Make sure you are within transmission range.
No connection can be
established.
Restart all devices.
9 Cleaning and Care
Important:
– Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solu-
tions. These may damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, lint-free cloth.
10 Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should be disposed of separately
from unsorted municipal waste at the end of its service life.
All owners of waste equipment are obliged to dispose of waste equipment separa-
tely from unsorted municipal waste. Before handing the old device to a collection
point, end users are required to separate old batteries which are not enclosed by
the old device, as well as lamps which can be removed from the old device without
any damage.
Distributors of electrical and electronic equipment are legally required to accept waste equip-
ment free of charge. Conrad offers the following free return options (further information is
available on our website):
At our Conrad stores
At the collection points established by Conrad
At the collection points of public waste disposal agencies or at the collection systems set up
by manufacturers and distributors in accordance with the German Electrical and Electronic
Equipment Act.
The end user is responsible for deleting personal data on the old device before disposal.
Please note that in countries outside Germany, other obligations may apply to the return and
recycling of old devices.
11 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration of
conformity in the available languages.
12 Technical data
12.1 Receiver (RX)
Nominal voltage ............................ 5 V/DC, 5 W max. (Micro USB)
Dimensions (W x H x D) ............... Approx. 90 x 39 x 10 mm (without HDMI plug)
Weight (approx.) ........................... 27 g
12.2 Transmitter (TX)
Nominal voltage ............................ 5 V/DC, 5 W max. (Micro USB)
Dimensions (W x H x D) ............... Approx. 90 x 39 x 10 mm (without HDMI plug)
Weight (approx.) ........................... 27 g
12.3 General information
Compression ................................ H.265
HDMI ............................................ HDMI 1.3
HDCP ........................................... HDCP 1.2
HDMI resolution ............................ max. 1080p / 60 Hz
Number of receivers ..................... max. 2
Pixel clock rate ............................. max. 165 MHz
Data rate ....................................... max. 6.75 Gbps
HDMI connection .......................... HDMI type AM
Length of USB cable ..................... approx. 800 mm
Length of HDMI cable ................... approx. 150 mm
Operating conditions ..................... -5 to +70 °C, 5–90 % RH (non-condensing)
Storage conditions ........................ -5 to +60 °C, 5–90 % RH (non-condensing)
12.4 Wi-Fi
Wi-Fi standard .............................. IEEE 802.11ac, 5 GHz
Frequency ..................................... 5.150 – 5.250 GHz
Signal direction ............................. Unidirectional
Transmission power...................... max. 13 dBm (EIRP)
Range ........................................... max. 30 m
www.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE. *2793803_V3_0124_02_dm_mh_en