Publicité
Les langues disponibles
Les langues disponibles
Axess)
m
Unscrew the height-adjustable feet until the mark on
the base has reached the indicated guide dimension
m
Fix the attachment plate side lugs (top) depending on
C1 1/4" /32 mm).
the installation situation. If there is no gap or only a slight
gap, it is not necessary to fix the side lugs.
m
lf there is a fairly large gap above the appliance, fit a
:
—
:
wooden beam above the appliance, ensuring that the
It is very important to comply with this dimension for
wooden beam fits the gap exactly.
the subsequent alignment of the furniture fronts.
Align the furniture fronts with the spirit level.
Before attaching the appliance in the cavity, check that
the finger guard functions by opening and closing the
two refrigerator compartment doors several times.
12.
Attaching the appliance to the top of
the cavity
m
Attach the cover strip to the attachment plate (top).
Shorten the fitting strip to the required height!
13.
Checking that the finger guard
moves easily
It is now essential to check that the finger guard moves
easily. At a later time any required corrections will be more
ifficult.
m
Push the finger guard on the hinge side into the gap
between the appliance and cavity wall.
It must be possible to push in and pull out the finger
guard easily!
m
Screw the attachment plate lugs (top) to the overhead
furniture/fixtures.
19
Publicité
