Grundig Eton G1000A Mode D'emploi page 8

All manuals and user guides at all-guides.com
BASIC OPERATIONS
6. AC ADAPTOR (NOT INCLUDED)
The G1000A can be used with an AC adaptor that supplies an
output of 3 volts DC, negative polarity (center tip set to negative),
capable of supplying 100 milliamperes or greater current. Plug tip
diameters: 3.4 millimeters outer; 1.3 millimeter inner.
7. CLOCK
The clock displays time in 12 hour, AM/PM format.
While keeping the TIME SET button (14) pressed, set the correct
hour and minutes with the HOUR (7) and MINUTE (8) buttons.
They can be pressed with quick, short presses to advance slowly or
they can be kept pressed down to advance rapidly. When finished,
release the TIME SET button.
8. ALARM SET
While keeping the AL.SET button (15) pressed, set the
correct wake-up hour and minutes with the HOUR (7) and MINUTE
(8) buttons. They can be pressed with quick, short presses to
advance slowly or they can be kept pressed down to advance
rapidly. When finished, release the AL.SET button.
15
14
8
continued
hour minute
7
8