Troubleshooting
Troubleshoot problems as shown
below. If it is determined that servicing
is necessary, contact the service
center.
■Error Report Screen on the Remote Controller
To return to the home screen
and press the "BACK" button.
•If the Remote Controller indicates there is an issue with the storage battery unit and the operating
status LED on the Hybrid Solar Inverter is flashing a red color, the unit must be checked and
serviced. Contact the service center.
•Confirmation messages that appear on the Remote Controller clear when the inverter is
restarted. For the inverter stopping procedure, see page 24.
48
Error Message
1
Check the error code on the
Remote Controller.
2
Look up the error code on the
following page.
3
Follow the directions as given
in the error message.
CENTER.
Error Code