Tabuchi Electric EHW-S55P3B-PNUS Manuel De L'utilisateur page 38

Configuring the Connection to the Internet
After all parameters have been configured, select "MANUAL
8
(FIXED)" and press [ENTER].
●
This enables the entered settings and returns to the network
settings screen.
Move the cursor to "MANUAL" to change the button in the
lower-right from [CHANGE] to [ENTER]. Press [ENTER] and
confirm that the settings have been updated.
Press [BACK] at the screen displaying the current settings.
9
●
This returns to the network settings screen.
This completes the procedure to perform manual configuration of network settings.
Follow the procedure described in "4. Performing the communication test" (Page 38) to test the
connection.
4. Performing the communication test
1
Press [ ↓ ] to select "COMMUNICATION TEST" and press
[ENTER].
●
This displays the communication test screen.
2
Check the content on the screen and press [ENTER].
●
This starts the automatic communication test.
38