Tabuchi Electric EHW-S55P3B-PNUS Manuel De L'utilisateur page 20

Stand-alone Operation
■Stand-alone Operation Startup (Power Outage)
After a power outage occurs, an error message appears on the screen and the inverter
automatically switches from grid-tied operation to stand-alone operation.
1
After a power outage has been detected,
error code "gxxx" appears on the Remote
Controller.
GRID ABNORMALITY DETECTED.
WILL RESTART IN 5 MIN. ONCE GRID IS
BACK TO NORMAL. PLEASE CONTACT THE
SERVICE CENTER IF THE ERROR MESSAGE
CONTINUES MORE THAN 5 MIN.
2
After a power outage has been detected,
the Remote Controller automatically
changes the operating status message to
"STAND-ALONE→ ".
20
( In a Power Outage )
3
After about 10 seconds, the Remote
Controller automatically changes the
o p e r a t i n g s t a t u s m e s s a g e t o
"STAND-ALONE MODE".
The status lamp will light up red. Then
the electrical appliance which are
connected to the back-up breaker box
can be powered.