Tabuchi Electric EHW-S55P3B-PNUS Manuel De L'utilisateur page 32

Configuring the Connection to the Internet
2. Connecting devices
■ Network configuration schematic diagram
Remote controller
LAN port
LAN cable
Router
■ Connecting LAN cables (Connecting LAN cables between the remote
controller and router)
1
Remove the remote controller.
1. Pull the clips at the bottom of the remote controller
toward you to separate the remote controller from the
mounting bracket.
2. Once the clips have become detached, slide the
remote controller upward.
3. Pull the remote controller toward you.
2
Install the LAN cable.
1. Connect the LAN cable with the LAN cable connector.
2. Close the clamp around the cable.
3. If running the cable along a wall, remove the wire duct
cover.
32
Area of customer responsibility
WAN port Line terminating equipment
(modem, etc.)
Internet service
connection
Data center
3.
2.
1.
Remote controller
cable connector
LAN cable connector
Clamp
Wire duct cover