LaserLiner PowerCross-Laser 5 Combi Mode D'emploi page 10

Completely read through the operating instructions, the „Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the
laser device is passed on, this document must be passed on with it.
Intended use
This cross-line laser is intended for horizontal and vertical alignment and
plumb-lining. The device has a green laser cross, three red laser lines,
and a plumb laser. Optical signals warn the user when the unit is outside
its self-levelling range to prevent measurement errors. The device can be
attached to tripods with a 5/8" thread. The CombiRangeXtender 40 laser
receiver is suitable for use in the integral handheld receiver mode.
General safety instructions
– The device must only be used in accordance with its intendedpurpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail
or the battery charge is weak.
– Use the power supply/charger unit only in closed rooms; do not expose
to moisture or rain otherwise risk of electric shock.
– Use only original accessories. Using other accessories invalidates
the warranty.
– Disconnect the power pack from the mains when the device is not in use.
10
EN