Playing Discs; Playing A Disc - Sony SCD-XA5400ES Mode D'emploi

Playing Discs

Playing a Disc

The basic operations are explained below.
HDMI
?/1
Z
N
AMS ./
>
1
Turn on the amplifier. Turn down the
volume level to the lowest.
2
Select the player position using the
input selector on the amplifier.
3
Press on the player to turn on the
?/1
player.
4
Press A on the player to open the disc
tray, and place a disc on the tray.
A N X
x
.
AMS >
?/1
HDMI
X
x
With the label side up
5
Press N.
Playback starts from the first track. If you
want to start playing from a specific track,
turn . AMS > to select the track
number before pressing
6
Adjust the volume on the amplifier.
Basic operations during play
To Do the following:
Stop play Press x.
Press X.
Pause play
Press X or
Resume play
after pausing
Select a track Turn . AMS >.
Eject a disc Press A.
Note
During playback, increase the volume level gradually
starting from the lowest level. The output from this
player may contain band width that is out of the normal
listening range. This may cause damage to the speakers
or ears.
To output audio signals from the
HDMI OUT jack
Press HDMI during playback stop (page 15).
The HDMI button will light up, and "HDMI
ON" appears on the display.
N .
N
.
GB
19