neabot P1 pro Guide De L'utilisateur page 13

Care and Maintenance
Cleaning the Sponge Filter
1. Remove the dust cup and take out the sponge.
3. Put it in a well-ventilated place for at
least 24 hours of drying treatment.
Note:
• The filter should be cleaned with cold water at least every other month.
• Please follow the frequency of use and conditions, the maintenance period is also different, regularly confirm if it is
dirty, clean it.
• When cleaning, remember to disconnect the power supply and unplug the plug from the socket.
• Be sure to install sponge filter after drying.
• No dry sponge filter can cause electric shock and malfunction.
above
24H
2. Please wash with tap water, and
drain the water after washing.
4. Install the sponge back to its original
place after it is completely dry. Be sure to
install the sponge.
10