neabot P1 pro Guide De L'utilisateur page 11

Care and Maintenance
Clean the Dust Cup
1. Remove the dust cup: Lift
slightly in the arrow direction to
remove the dust cup.
Note:
• Be careful when handling the dust cup.
• If the removed dust cup is cleaned after being dumped with dust, remember to
install the dust cup after it is dry to prevent water ingress in the motor and cause
electric shock or damage to the machine.
Clean the Electric Clippers
1. Please retract the movable
knife adjustment knob to the
bottom before installing the knife.
2. Open the lid to dump out the
trash: push the blue buckle to open
the dust cup and dump out the
trash.
2. Vacuum/clean debris from the
blade and the clipper.
clipper
8
3. Install the dust cup: install the
dust cup in the direction of the
arrow.
3. Drop the lubricant on the blade.
blade