neabot P1 pro Guide De L'utilisateur page 12

Care and Maintenance
Clean HEPA
1. Remove the dust cup, take out the HEPA.
3. Place it in a well-ventilated place for at
least 24 hours of drying.
Note:
• The filter should be cleaned with cold water at least every other month.
• Please follow the frequency of use and conditions, the maintenance period is also different,
regularly confirm if it is dirty, clean it.
• When cleaning, remember to disconnect the power supply and unplug the plug from the socket.
• Be sure to install HEPA after drying.
• No-yet-dry HEPA can cause electric shock and malfunction.
above
24H
2. Wash with water, drain the water after washing.
4. Install the HEPA back to the original place after
it is completely dry, please be sure to install it.
9