INSTALLATION
Installing/Replacing the lamp
For the installation, you need one 230 V/1200 W G-22 lamp.
The lamp must only be changed when wearing appropriate protective clothing (protection glasses, protection
gloves, helmet with sight, leather apron).
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
29/83
(9) DMX-In socket
(10) DMX-Out socket
(11) Lamp system
(12) Power supply
(13) Fuseholder
(14) Power switch
(15) Mode-button
(16) Down-button
(17) Up-button
(18) Display
00026337.DOC, Version 1.4