Publicité
Les langues disponibles
Les langues disponibles
ALPINA 4001 Elektro - High Performance
Electric Glider
Alpina Elektro CME – ARC
Alpina Elektro CME – ARF
Alpina Elektro CME – Design # 40115
Alpina Elektro CMT – ARC # 40120
Alpina Elektro CMT – ARF # 40130
Alpina Elektro CMT – Design # 40135
Preface.
Thank you for choosing the ALPINA 4001 Elektro
high performance model glider. We wish you
much success and enjoyment with your new
model.
Your TANGENT model kit from the home of
GRAUPNER represents a mature design and the
product of many years experience in the
manufacturing of high performance model aircraft.
However, despite the most scrupulous quality
control, small deviations may arise. We ask
therefore that all parts be carefully inspected prior
to undertaking any assembly work and before
flying the model. This is particularly important as
any used parts are not subject to repair or
replacement. Notwithstanding the above, we are
happy to repair or replace parts found to be faulty
– subject to approval by the factory. Please
therefore return any faulty parts together with a
detailed description of the fault.
Our products are the subject of continuous
development and as such we reserve the right to
make
changes
to the design,
manufacture and materials supplied without prior
notice. As the product is supplied in kit form, no
claims will be considered in respect of the
assembly or operation of the model.
Caution!
Remote controlled models and model aircraft in
particular, are not toys in the normal sense.
Building and operation of this model aircraft
requires
a
high
understanding and care, as well as considerable
skill and discipline at the flying field. Errors in
the building process and in the subsequent
operation of this product can result in serious
personal injury and damage to property. As kit
Graupner GmbH & Co. KG * Henriettenstraße 94-96 * D - 73230 Kirchheim/Teck
All manuals and user guides at all-guides.com
# 40100
# 40110
engineering,
degree
of
technical
Stand: 2010
25
manufacturer we have no control over the
assembly, maintenance and operation of this
model
aircraft,
opportunity to stress the potential hazards and
emphasise the personal responsibility on the
part of the user.
Kit contents
(For Details see Parts List)
1
x set wigs - manufactured using LSCTP
technology, aerodynamically optimized wing tips,
Carbon D-box, live hinged ailerons and camber
changing flaps, TA servo locks and Steel wing
joiner.
1 x pure white GRP fuselage, with pre-installed
Bowden tubes.
1 x CFK canopy.
1 x preformed all flying tail plane set.
1 x pre-formed rudder.
1 x set wooden parts.
1 x wire parts set.
1 x building instruction sheet.
Technical Data
Wingspan (mm)
Fuselage length (mm)
Wing area (FAI) (dm²)
Wing loading (FAI)(gr/dm²)
Airfoil
Longitudinal dihedral (deg)
Centre of gravity
(mm from root leading edge)
RC functions
Ailerons
Flaps
Rudder
Elevator
Aero tow Release
Airbrake (CME)
It is very important that the Receiver Battery be
selected to match the intended use. The capacity
ought to be sufficiently generous to cope with the
load of the on board radio control system (it's
always more useful to have more battery capacity
than lead nose-weight!). Considering the use of up
to 9 servos, we recommend a battery pack of at
least 3000 mAhr capacity (C ) of good quality and
always well maintained. For long duration thermal
we
therefore
take
this
4001
1760
80.60
From 62
026-TA Strak
1
100
2 x DS 3068
(Grp # 5188)
2 x DS 3068
(Grp # 5188)
1 x DS 3328
(Grp # 5157)
1 x DS 3328
(Grp # 5157)
1 x C 3241
(Grp # 3900)
2 x C 351
(Grp # 5123)
*
www.graupner.de
Publicité
