Simons Voss Technologies SmartCD.HF Guide Abrégé page 28

All manuals and user guides at all-guides.com
SmartCD.HF
1. Place the card to be written or read on the SmartCD.HF.
2. Start the write or read process in the LSM software.
NOTE
Positioning of SmartTags and transponders with RFID inlay
The antenna of the SmartCD.HF is very large. Small RFID antennas
placed in the middle are therefore not reached.

EN
Place SmartTags and transponders with RFID inlay on the edge of
the SmartCD.HF.
5. Writing and reading
23 / 96