National Geographic 265NC Mode D'emploi page 9

1. Touch the INDOOR TEMPERATURE section, + and – buttons will start to fl ash.
2. Touch the + or – buttons to change the measurement from Celsius to Fahrenheit
3. Touch the INDOOR TEMPERATURE section to confi rm.
4.1 Indoor Temperature Alarm 4.1 Indoor Temperature Alarm
4. The indoor temperature and high alarm icon (HI AL) will start to fl ash as well as the
5. Touch the + or – button to change the value, touch the ON/OFF button to enable
or disable the alarm. Touch the INDOOR TEMPERATURE section to confi rm.
6. Follow step 5 to set the indoor temperature low alarm (LO AL).
7. Once the temperature alarms are set, the maximum indoor temperature will be
displayed.
8. To reset the maximum temperature touch and hold the fl ashing maximum value for
3 seconds, the value will reset to the current reading.
9. Touch the INDOOR TEMPERATURE section to confi rm.
10. Follow steps 8-9 to reset minimum readings.
5.0 Outdoor Temperature 5.0 Outdoor Temperature
1. Touch the OUTDOOR TEMPERATURE section.
2. Touch the + or - button to shift between the indoor temperature, windchill
reading, and dew point reading.
3. Procedures and settings are similar to the Indoor Temperature.
Follow steps in sections 4.0 to 4.2 to set °C/°F, Hi and Lo alarms for indoor
temperature, windchill and dew point, and to clear the maximum and minimum
readings for all 3 measurements.
1. Touch the INDOOR HUMIDITY section.
2. Procedures and settings are similar to the Indoor Temperature.
Follow steps in sections 4.0 to 4.2 to set Hi and Lo alarms and to clear the
maximum and minimum readings.
1. Touch the OUTDOOR HUMIDITY section.
2. Procedures and settings are similar to the Indoor Temperature.
(Follow steps in sections 4.0 to 4.2) to set Hi and Lo alarms and to clear the
maximum readings.
8.0 Wind Speed 8.0 Wind Speed
1. Touch the WIND SPEED section, + and – buttons will start to fl ash.
2. Touch the + or – buttons to switch between wind speed and wind gust.
3. When on wind speed touch the WIND SPEED section to confi rm.
4. Touch the + or – buttons to select the wind speed measurement value in
Kilometers per hour (km/h), miles per hour (mph), meters per second (m/s), knots
(knots), beaufort (bft). Touch the WIND SPEED section to confi rm.
5. The wind speed and high alarm icon (HI AL) will start to fl ash as well as the + and
– buttons.
6. Touch the + or – button to change the value, touch the ON/OFF button to enable
or disable the alarm. Touch the WIND SPEED section to confi rm.
All manuals and user guides at all-guides.com
9