Hama RC100 Mode D'emploi page 6

Activating Alarm 1/Alarm 2:
• If you press the ALARM button, the ALARM 1 is activated
and the symbol appears.
• If you press the ALARM button again, ALARM 2 is activated
and the symbol 2 appears.
• If you press the ALARM button again, both ALARM 1 and
ALARM 2 are activated and both symbols appear.
• If you press the ALARM button again, both ALARM 1 and
ALARM 2 are deactivated and the symbols disappear.
Activating the alarm/snooze function
If Alarm 1 or Alarm 2 rings, the corresponding alarm symbol lights up.
• Switch off the alarm by pressing the ALARM button.
• If you press the Light/Snooze function button, the alarm stops, the
backlight comes on for 5 seconds and the repeat alarm display
illuminates (Z ). The alarm rings again after 4 minutes.
z
• If it is not switched off, it stops automatically after 4 minutes.
International time display and setting
Press and hold the + button for three seconds.
• The symbol appears.
• Press the MODE button in the international time/temperature display and hold
for 3 seconds.
• International time can be set according to the above description:
press the + and - buttons as required.
• Pressing the MODE button again confirms the setting of international time.
Setting the Dual Time
• The dual time can be set by pressing MODE for 3 seconds in
Dual Time Display. The hour will flash for input.
• Press MODE: the hour of dual time display digits are
blinking and can be set by pressing "-" or "+" key.
• Press MODE again: the minute of dual time display digits are
blinking and can be set by pressing "-" or "+" key.
• Press MODE again to confirm the setting.
10
00092629man_de_el_en_fr_nl_pl_pt.indd 10-11
All manuals and user guides at all-guides.com
Backlight
Press the LIGHT/SNOOZE button: The backlight comes on and then goes out again
automatically after 5 seconds.
Temperature function
Press the °C/°F button to choose between Celsius and
Fahrenheit on the temperature display. The measuring
range of the internal thermometer is 0 ° to +40 ° C.
Receiving the DCF time code
This is automatically received every hour.
Replacing the battery:
Please use only the types of battery that are approved for this device and ensure that the
polarity is correct when inserting a new battery.
11
06.11.12 13:15