Hama RC100 Mode D'emploi page 5

• As soon as the batteries are installed, the LCD display lights up
and the clock automatically searches for the radio signal.
This process takes between 3 and 5 minutes.
• When the radio signal is received, the date and time displays
are automatically set and the radio control symbol appears.
• If the clock cannot receive a time signal, the radio control
symbol does not appear. In this case, you can set the time
manually.
• The radio controlled signal is received every hour.
Selection of Temperature/Alarm 1/Alarm 2/Dual Time
• If you press the MODE button, Alarm 1 time appears.
• If you press the MODE button again, Alarm 2 time appears.
• If you press the MODE button again, dual time appears.
• If you press the MODE button again, the temperature appears.
Setting the time manually
Press the MODE button in the time/temperature display and hold for three seconds, so
that the radio control symbol is no longer visible. If the hour display flashes, it can be set
using the + and - buttons. If you press the MODE button again, the minutes can be set
using the + and - buttons. Pressing the MODE button again confirms this setting.
Time setting
• Press the MODE button and hold for 3 seconds. The hour
display flashes and can be set using the + and - buttons.
• If you press the MODE button again, the minute display
flashes and can be set using the + and - buttons.
• If you press the MODE button again, the year display
flashes and can be set using the + and - buttons.
• If you press the MODE button again, the month display
flashes and can be set using the + and - buttons.
8
00092629man_de_el_en_fr_nl_pl_pt.indd 8-9
All manuals and user guides at all-guides.com
• If you press the MODE button again, the day display flashes
and can be set using the + and - buttons.
• Press the MODE button again to save the date display.
Note:
1. If no button is pressed within 30 seconds, the manual time setting mode
automatically closes and the time/temperature display appears again without
any data being processed.
2. For each setting mode, press the + or - button. For quick setting, press
and hold this button for two seconds.
Calendar
To change the weekday display from one language to another language, press key for
3 seconds - the display will show the current language (GER for German display, ENG for
English display).
for English -> for German ->
for Spanish.
Press & Hold key for 2 seconds will toggle to the other languages.
Setting Alarm 1:
• Press and hold the MODE button for about 3 seconds. The hour digits begin
flashing and can be set with the + or - button.
• If you press the MODE button again, the minute digits begin flashing and can
be set with the + or - button.
• If you press the MODE button again, the alarm time is set and the symbol
appears.
Setting Alarm 2:
In the Alarm 2 display
Alarm 2 is set in the same way as Alarm 1
for French -> for Italian ->
06.11.12 13:15
9