Caso Germany Blue One Power Manuel D'instructions page 53

15.6 Operating the Appliance
caso Blue One Power
All manuals and user guides at all-guides.com
Follow the instructions below in order to operate the appliance
safely:
The dial is in the Off position (all the way to the left)
before the cooking process.
Plug the mains plug into the power socket.
Within 3 seconds after connecting the appliance to the power
supply an acoustic signal sounds, the appliance is in Standby
mode, and a flashing "0" appears in the digital display.
Place a suitable cooking pot with its contents to be
cooked on the centre on the hob (Ø 120 mm - 260 mm).
Use the dial to set the desired power level (P-0; P-1; P-2;
P-3; P-4; P-5; P-6; P-7; P-8; P-9; P10).
The selected power level appears in the display.
As soon as the induction cooker is switched on the appliance
determines within 60 seconds whether suitable pots and pans
are being used.
If a suitable cooking vessel has been recognised, the appliance
heats up to the set power level.
In the event of unsuitable cookware an acoustic signal sounds
and the error code E1 appears in the digital display.
If a suitable cooking vessel has not been recognised within 60
seconds the appliance returns to Standby mode.
Please note
During the cooking process the power level can be readjusted
as you wish.
► If the pot is removed from the hob, then the power output is
reduced immediately, E1 appears in the display and the
acoustic signal sounds repeatedly.
► When the cooking process is completed turn the dial to the
ON-Off position (all the way to the left). The acoustic signal
sounds and the appliance is placed in Standby mode.
► If you do not select a setting within 2 hours the appliance
automatically switches over to Standby.
Operation and Handling
53