Siemens PAM0720 Mode D'emploi page 45

Things to check before calling the Technical Service
Easy-to-solve noises
J Make sure that the air expulsion tube and
the diffusion and collection sleeves are
fitted properly onto the appliance.
J Make sure that the air intakes and outlets
on the appliance are free of obstacles.
Technical service
Should your appliance fail to work properly and
all the instructions for use and installation
(especially the section headed
" "
Requirements.... ) have been carefully
observed, then remember that our Technical
Service Network is at your full disposal.
When contacting the Technical Service, quote
the model code (E-NR) and the appliance's
factory number (FD). This information can be
found on characteristics plate, Fig. 2.
Technical service / Warranty
45
J Make sure that the appliance is not in direct
contact with furniture or other appliances.
The air output may be flowing directly onto
these and thereby increasing the noise
level.
Any other type of fault or repair work
should be dealt with by a specialised
Technician. Get in touch with your
authorised dealer, customer service or the
Technical Service Network.
Warranty
The conditions of warranty depend on the
relevant Supplier in a particular country. Contact
the establishment where you purchased your
appliance for more information and quote the
appliance model and factory number. The receipt
of purchase for the appliance must be produced
prior to any work carried out under warranty.