Publicité
Les langues disponibles
Les langues disponibles
Beetronics User Manual | Bedienungsanleitung | Manuel d'utilisation
Installing the monitor
Installing the monitor
Package contents
To get started, unpack the box and verify if the following contents have been included.
WARNING! Do not use any unapproved accessories to ensure the safety and product life span. Any damages or injuries by
using unapproved accessories are not covered by the warranty.
Setup
Please read the supplied instruction manual and follow safety precautions before setting up the monitor. Turn off the source and
monitor before connecting to protect equipment. Check the surrounding environment for temperature and humidity within specified
limits (as outlined in the manual) when setting up the monitor. After positioning the monitor, follow these steps to connect:
6. SET THE CORRECT INPUT
(Metal only)
2. BNC, RCA, VGA, HDMI
1. DC
3. USB TOUCH
1.
Connect the power supply to the 5.5mm DC port at
the back of the display.
2.
Attach the preferred video cable (e.g., HDMI, VGA,
RCA, or BNC).
3.
Connect the USB touch cable to the USB touch port.
4.
Turn on the source providing the video signal.
5.
Power on the monitor.
6.
Set the correct input channel using the INPUT button
on the remote control or the AUTO button on the
back of the display. Confirm your selection by
clicking OK on the remote control or + on the
operating buttons at the back of the display.
9 EN
Publicité
