Publicité
Les langues disponibles
Les langues disponibles
Beetronics User Manual | Bedienungsanleitung | Manuel d'utilisation
Installing the touchscreen
Linux:
Beetronics touchscreens must be calibrated with universal third-party PCAP drivers depending on the Linux distribution
used. Various commonly used Linux distributions have integrated PCAP drivers by default however and will recognize the
touchscreen automatically.
NOTICE!
Our touchscreens consist of an LCD panel and a glass touchscreen panel. The touch panel is operated through the
provided USB cable, which also supplies a consistent 500mAh. If there's an interruption in the touch functionality, it's
typically due to a disruption in the power supply from the USB port on the connected PC to the display. In such
situations, make certain that no power-saving settings are turned on either on the PC or the USB port itself.
Furthermore, it's important to confirm that the length of the USB cable being used does not exceed the maximum
supported limit of 5 meters.
macOS:
To use a Beetronics touchscreen with a macOS device, you first need to install
the UPDD driver.
1.
Download the UPDD driver from
2.
Find and run the downloaded .dmg file. Follow the on-screen instructions. During the
installation process, make sure to allow the installation of the extensions when
prompted by the macOS system.
3.
Once you've completed the on-screen installation wizard, restart your Mac device to
complete the installation and begin using your touchscreen.
www.beetronics.com/download/macOSdriver.
14 EN
Publicité
