Publicité
Les langues disponibles
Les langues disponibles
English
Guide to Using this Manual
Pictograms
All the pictograms attached to the
machine are shown and explained in this
manual.
Symbols in text
Warning where there is a risk of an
accident or personal injury or serious
damage to property.
Caution where there is a risk of
damaging the machine or its individual
components.
Engineering improvements
STIHL's philosophy is to continually
improve all of its products. For this
reason we may modify the design,
engineering and appearance of our
products periodically.
Therefore, some changes, modifications
and improvements may not be covered
in this manual.
2
Safety Precautions and
Working Techniques
Special safety precau -
tions must be observed
when working with this
analyzer because it is
powered by electricity.
It is important you read
and understand the
instruction manual before
first use and keep the
manual in a safe place for
future reference. Non-
observance of the
instruction manual may
result in serious or even
fatal injury. Always read
and observe the instruc -
tion manual of the power
tool to be tested.
The analyzer can be used with STIHL
diagnostic software - see "Diagnostic
Software". During operation, follow the
safety instructions in the STIHL
diagnostic software.
Observe all applicable local safety
regulations, standards and ordinances.
Minors should never be allowed to use
an analyzer.
The user is responsible for avoiding
injury to third parties or damage to their
property.
Servicing dealers can use the STIHL
ADG 2 digital analyzer to test STIHL and
VIKING cordless power tools. An
original STIHL battery is required for the
test. Only use original, geometrically
matching STIHL batteries with a
maximum capacity of 50 Ah and a
maximum voltage of 42 V.
The analyzer must not be used for any
other purpose because of the increased
risk of accidents and damage to the
analyzer. Never attempt to modify the
analyzer in any way since this may result
in accidents or damage to the analyzer.
The cordless power tool's motor starts to
run during the test. Before starting the
test, always take precautions to
eliminate the risk of accidents and injury
from contact with the power tool's
attachment.
To reduce the risk of injury, no other
person may stand in the area of the
power tool's motor during the test.
Only use the original STIHL analyzer.
Do not use damaged or deformed
batteries with the analyzer.
To reduce the risk of personal injury, do
not operate the analyzer if it is damaged
or not properly assembled. Never use an
analyzer with a defective housing,
adapter or connecting cord to the power
tool or a defective power cord.
Connect the analyzer only to an easily
accessible wall outlet with the voltage
and frequency specified on the rating
plate.
Protect from dampness.
ADG 2
Publicité
