Télécharger Imprimer la page

Stihl ADG 2 Notice D'emploi page 10

Masquer les pouces Voir aussi pour ADG 2:

Publicité

Les langues disponibles

Les langues disponibles

English
If the red light emitting diodes glow /
flash
1 light emitting diode
Battery too
glows continuously
hot/cold
red:
4 light emitting diodes
Fault in battery
flash red:
1)
Remove the battery from the
analyzer to cool it down/warm it up.
After cooling down/warming up,
restart the test – insert the battery
in the analyzer.
2)
Take the battery out of the analyzer
and refit it again – if the LEDs still
flash, the analyzer is faulty and
must be replaced.
8
Light Emitting Diodes (LEDs)
on Analyzer
The light emitting diode (1) on the
analyzer can glow or flash green, yellow
or red.
1)
Green continuous light
2)
Cordless power tool or function in
order.
Yellow continuous light
Intermittent fault in cordless power
tool in the past (e.g. loose contact),
power tool ready for operation at the
moment – the fault can be called up
in the power tool's fault memory.
Red continuous light
Active fault in cordless power tool,
power tool is not ready for operation
at the moment – a fault code is
displayed.
Problem – see "Troubleshooting"
Red flashing light
... may mean the following:
Observe safety information on
display
Fault in analyzer (analyzer's display
remains blank) – software update
required.
Diagnostic software
STIHL diagnostic software can be used
only with the MDG 1, ADG 1 and ADG 2
analyzers.
System Requirements
1
Install STIHL diagnostic software only
on a computer that meets the system
requirements. You must have
administrator rights to install the
software on a computer running
®
Microsoft
Windows
system administrator if necessary.
Operating System
®
Microsoft
Windows
®
Microsoft
Windows Vista
®
Microsoft
Windows
Software Requirements
®
Microsoft
.NET 3.5 or higher
®
Adobe
Acrobat
higher
Hardware Requirements
Minimum requirements
CPU 1 GHz
256 MB free memory
minimum of 100 MB hard disk
space
Resolution – SVGA monitor
(minimum resolution 1024 x 768)
USB interface 1.1 or higher
CD-ROM or DVD drive
®
, contact your
®
XP SP 3 or
®
or
®
7
®
Reader 9 or
ADG 2

Publicité

loading