cecotec CECOFRY ADVANCE PRECISION Manuel D'instructions page 23

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1.
Scale
1.
Control panel
2.
Housing
3.
Basket
4.
Rack
5.
Basket handle
6.
Air outlet
7.
Power cord
8.
Control panel
Fig. 2.
Pre-set programmes
1.
Fan indicator light
2.
Scale mode light indicator
3.
Increasing and decreasing the temperature
4.
ON/OFF and Start/Pause
5.
Default programme selection
6.
Increasing and decreasing the time
7.
Tare function
8.
Scale function
9.
10. Display
2. BEFORE USE
- Take the product out of the box.
- Check for any visible damage. If any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
- Clean the basket and rack thoroughly with hot water, washing-up liquid and a non-abrasive
sponge.
- Clean the interior and the exterior of the device with a damp cloth.
- Do not wet the heating element.
- Do not fill the device with oil or any other liquid.
- Place the device on a stable and level surface.
- Do not place the device on any surface that it is not heat-resistant.
- Place the rack in the basket properly.
44 CECOFRY ADVANCE PRECISION
Notes
You may notice a slight burning smell or smoke when using the fryer for the first time, caused
by the excess of lubricants from the manufacturing process. This does not affect the safety of
the product.
3. OPERATION
Place the appliance on a flat and stable surface.
1.
Connect the device.
2.
Remove the basket carefully from the device. Use the handle to do this. Make sure the
3.
rack is placed in the basket.
Put the ingredients in the basket.
4.
Warning
Do not fill the basket beyond the Max mark.
Put the basket back in the device. The device has a safety system that will not allow you
1.
to use it if the basket is not in place.
Press the ON/OFF icon, then select the desired programme or set the time and temperature
2.
and press the Start/Pause icon. At this point, the device will start working.
If at any point during cooking, you wish to pause the process, press the Start/Pause icon.
3.
If you wish to cancel the process, hold down the icon.
When you hear an alarm, it means that the preparation time has come to an end. Pull the
4.
container out of the device.
Check if the ingredients are ready. If not, put the container back inside the device and set
5.
the timer to a few more minutes.
To take the ingredients out of the appliance, place it on a heatproof surface. Depending on
6.
the kind of ingredients, steam may come out.
Empty the food from the basket into a bowl or plate. Use tongs to remove ingredients, as
7.
this will prevent residual cooking oil from dripping onto the dish. Be careful not to burn
yourself.
You can use the device again after having used it.
8.
Control panel
ON/OFF icon (5)
- Once the basket and the rack are properly placed in the main unit housing, the ON/OFF icon
will light up.
- Press the ON/OFF icon, the device will emit a sound and the display will show 200ºC/ 15
minutes alternately.
ENGLISH
CECOFRY ADVANCE PRECISION 45